Cisco Sx350 User Manual

Clock Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 256
9
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server Global Configuration mode command to define SNTP servers.
Example
The following example enables the device to use SNTP Unicast clients.
switchxxxxxx(config)# sntp unicast client enable
9.19 sntp unicast client poll
To enable polling for the SNTP Unicast clients, use the sntp unicast client poll
command in Global Configuration mode. To disable the polling, use the no form of
this command.
Syntax
sntp unicast client poll
no sntp unicast client poll
Parameters
N/A
Default Configuration
Polling is enabled.
Command Mode
Global Configuration mode
User Guidelines
The polling interval is 1024 seconds.

Cisco Sx350 Specifications

General

Brand	Cisco
Model	Sx350
Category	Switch
Language	English