Cisco Sx350

Radius Server Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 990
49
User: Bob
Accounting Session Time: 6 hours,15 minutes
Authenticated by: Radius
NAS Address: 10.23.1.3
User Address: 160.134.7.8
Termination Reason: User Request
*20-Feb-2008, 9:20, Date and Time were updated to 29-Jun-14, 11:00
20-Feb-2014, 9:05, Start
User: Bob
Authenticated by: Radius
NAS Address: 10.23.1.3
User Address: 160.134.7.8
*20-Feb-2008, 9:00, Reboot
49.16 show radius server configuration
To display Radius Server global configuration, use the show radius server
configuration command in Privileged EXEC mode.
Syntax
show radius server configuration
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
Use the show radius server configuration command, to display Radius server
global configuration.