Cisco Sx350

File System Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 446
18
Time: 23:11:17
Active after reboot
switchxxxxxx#
boot system inactive-image
switchxxxxxx#
show bootvar
Active-image: flash://system/images/image_v12-03.ros
Version: 12.03
MD5 Digest: 6
3FA000012857D8855AABEA7451265456
Date: 04-Jul-2014
Time: 15:03:07
Inactive-image: flash://system/images/image_v14-01.ros
Version: 14.01
MD5 Digest: 23FA000012857D8855AABC7577AB5562
Date: 24-Jul-2014
Time: 23:11:17
18.18 show mirror-configuration service
To display the mirror-configuration service status, use the show
mirror-configuration service command in User EXEC mode.
Syntax
show mirror-configuration service
Command Mode
User EXEC mode
Example
The following example displays the status of the mirror-configuration service
switchxxxxxx# show mirror-configuration service
Mirror-configuration service is enabled