Cisco Sx350

Clock Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 262
9
Interface: VLAN 101
Last response: 9:53:21.789 PDT Feb 19 2005
Stratum Level: 255
9.23 show time-range
To display the time range configuration, use the show time-range command in
User EXEC mode.
Syntax
show time-range
time-range-name
Parameters
• time-range-name —Specifies the name of an existing time range.
Command Mode
User EXEC mode
Example
switchxxxxxx# show time-range
http-allowed
--------------
absolute start 12:00 1 Jan 2005 end 12:00 31 Dec 2005
periodic Monday 12:00 to Wednesday 12:00
9.24 time-range
To define time ranges and to enter to Time-range Configuration mode, use the
time-range command to define time ranges and to enter to Time-range
Configuration mode in Global Configuration mode. To restore the default
configuration, use the no form of this command.
Syntax
time-range
time-range-name
no time-range time-range-name