Cisco Sx350

ACL Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 76
2
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# clear access-lists counters gi11
2.19 show interfaces access-lists trapped
packets
Use the show interfaces access-lists trapped packets Privileged EXEC mode
command to display Access List (ACLs) trapped packets.
Syntax
show interfaces access-lists trapped packets
[interface-id | port-channel-number |
VLAN]
Parameters
• interface-id—Specifies an interface ID, the interface ID is an Ethernet port
port-channel.
• port-channel—Specifies a port-channel.
• VLAN—Specifies a VLAN
Command Mode
Privileged EXEC mode
User Guidelines
This command shows whether packets were trapped from ACE hits with logging
enable on an interface.