Cisco Sx350

GARP VLAN Registration Protocol (GVRP) Commands
455 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
19
Default Configuration
Dynamic registration of VLANs on the port is allowed.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example forbids dynamic registration of VLANs on
gi1 2.
switchxxxxxx(config-if)# interface gi12
switchxxxxxx(config-if)# gvrp registration-forbid
19.5 gvrp vlan-creation-forbid
To disable dynamic VLAN creation or modification, use the gvrp
vlan-creation-forbid Interface Configuration mode command. To enable dynamic
VLAN creation or modification, use the no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Parameters
This command has no arguments or keywords.
Default Configuration
Enabled.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example disables dynamic VLAN creation on
gi1 3.