Cisco Sx350

Spanning-Tree Commands
1123 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
58
switchxxxxxx(config)# spanning-tree mst configuration
switchxxxxxx(config-mst) # revision 1
58.26 show (MST)
Use the show MST Configuration mode command to display the current or
pending MST region configuration.
Syntax
show
{current | pending}
Parameters
• current—Displays the current MST region configuration.
• pending—Displays the pending MST region configuration.
Default Configuration
N/A
Command Mode
MST Configuration mode
Example
The following example displays a pending MST region configuration
switchxxxxxx(config-mst)# show pending
Gathering information ..........
Current MST configuration
Name: Region1
Revision: 1
Instance VLANs Mapped State
-------- ------------------------ -----
0 1-4094 Disabled
switchxxxxxx(config-mst)#