User Interface Commands
1247 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
66
66.13 login
To enable changing the user that is logged in, use the login User EXEC mode
command. When this command is logged in, the user is prompted for a
username/password.
Syntax
login
Parameters
This command has no arguments or keywords
Default Configuration
None
Command Mode
User EXEC mode
Example
The following example enters Privileged EXEC mode and logs in with the required
username ‘bob’.
switchxxxxxx#
login
User Name:bob
Password:*****
switchxxxxxx#
66.14 terminal datadump
To enable dumping all the output of a show command without prompting, use the
terminal datadump User EXEC mode command. To disable dumping, use the no
form of this command.
Syntax
terminal datadump
To Next Page
Loading...
