Cisco Sx350

DHCP Relay Commands
287 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
11
DHCP relay is enabled on VLANs: 1, 2, 4, 5
Active: 1, 2, 4, 5
Inactive:
Global Servers: 1.1.1.1 , 2.2.2.2
VLAN 1: 1.1.1.1, 100.10.1.1
VLAN 2: 3.3.3.3, 4.4.4.4, 5.5.5.5
VLAN 10: 6.6.6.6
11.6 ip dhcp information option
Use the ip dhcp information option Global Configuration command to enable
DHCP option-82 data insertion. Use the no form of this command to disable DHCP
option-82 data insertion.
Syntax
ip dhcp information option
no ip dhcp information option
Parameters
N/A
Default Configuration
DHCP option-82 data insertion is disabled.
Command Mode
Global Configuration mode
User Guidelines
DHCP option 82 would be enabled only if DHCP snooping or DHCP relay are
enabled.
Example
switchxxxxxx(config)# ip dhcp information option