DHCP Relay Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 286
11
DHCP relay is enabled on VLANs: 1, 2, 4, 5
Active:
Inactive: 1, 2, 4, 5
Global Servers: 1.1.1.1 , 2.2.2.2
Example 3. Option 82 is supported (enabled):
switchxxxxxx#
show ip dhcp relay
DHCP relay is globally enabled
Option 82 is enabled
Maximum number of supported VLANs without IP Address is 4
Number of DHCP Relays enabled on VLANs without IP Address: 2
DHCP relay is enabled on Ports: gi11,po1-2
Active: gi11
Inactive: po1-2
DHCP relay is enabled on VLANs: 1, 2, 4, 5
Active: 1, 2, 4, 5
Inactive:
Global Servers: 1.1.1.1 , 2.2.2.2
Example 3. Option 82 is supported (enabled) and there DHCP Servers defined per
interface:
switchxxxxxx#
show ip dhcp relay
DHCP relay is globally enabled
Option 82 is enabled
Maximum number of supported VLANs without IP Address is 4
Number of DHCP Relays enabled on VLANs without IP Address: 2
DHCP relay is enabled on Ports: gi11,po1-2
Active: gi11
Inactive: po1-2
To Next Page
Loading...
