IGMP Snooping Commands
501 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
23
23.19 show ip igmp snooping multicast-tv
To display the IP addresses associated with Multicast TV VLANs, use the show ip
igmp snooping multicast-tv EXEC mode command in User EXEC mode.
Syntax
show ip igmp snooping multicast-tv [vlan
vlan-id
]
Parameters
• vlan
vlan-id
—(Optional) Specifies the VLAN ID.
Command Mode
User EXEC mode
Example
The following example displays the IP addresses associated with all Multicast TV
VLANs.
switchxxxxxx#
show ip igmp snooping multicast-tv
VLAN IP Address
---- -----------
1000 239.255.0.0
1000 239.255.0.1
1000 239.255.0.2
1000 239.255.0.3
1000 239.255.0.4
1000 239.255.0.5
1000 239.255.0.6
VLAN
----
1000
Dynamic
---------
gi11
Static
---------
gi12
Forbidden
----------
gi13-4
To Next Page
Loading...
Need help?
General
