Cisco Sx350

802.1X Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 120
3
3.33 show dot1x statistics
To display 802.1X statistics for the specified port, use the show dot1x statistics
command in Privileged EXEC mode.
Syntax
show dot1x statistics interface
interface-id
Parameters
• interface-id —Specifies an Ethernet port.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays 802.1X statistics for
gi1 1.
switchxxxxxx# show dot1x statistics interface gi1 1
EapolFramesRx: 11
EapolFramesTx: 12
EapolStartFramesRx: 1
EapolLogoffFramesRx: 1
EapolRespIdFramesRx: 3
EapolRespFramesRx: 6
EapolReqIdFramesTx: 3
EapolReqFramesTx: 6
InvalidEapolFramesRx: 0
EapLengthErrorFramesRx: 0
LastEapolFrameVersion: 1
LastEapolFrameSource: 00:08:78:32:98:78