Cisco Sx350

Radius Server Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 994
49
*20-Feb-2008, 9:00, Reboot
Example 2. The following example displays one rejected user Bob:
switchxxxxxx# show radius server rejected users 30-Jun-14 16:04
User Name: Bob
User Type: Login
NAS Address: 10.1.1.1
User Address: 10.23.4.3
Reason: Illegal password
*20-Feb-2008, 9:20, Date and Time were updated to 29-Jun-14, 11:00
*20-Feb-2008, 9:00, Reboot
49.19 show radius server nas secret
To display secret keys, use the show radius server nas secret command in
Privileged EXEC mode.
Syntax
show radius server nas secret [default |
ip-address ]
Parameters
• default—Specifies the default secret key hat will be applied to
communicate with NASs that do not have a private key.
• ip-address —Specifies the RADIUS client host IP address. The IP address
can be an IPv4, IPv6 or IPv6z address.
Command Mode
Privileged EXEC mode
User Guidelines
Use the show radius server nas secret default command, to display the default
secret key.