Cisco Sx350

Auto-Update and Auto-Configuration
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 202
6
Example 2. The example specifies the IPv6 address of TFTP server:
switchxxxxxx(config)# ip dhcp tftp-server ip address 3000:1::12
Example 3. The example specifies the IPv6 address of TFTP server:
switchxxxxxx(config)# ip dhcp tftp-server ip address tftp-server.company.com
6.5 ip dhcp tftp-server file
Use the ip dhcp tftp-server file Global Configuration mode command to set the full
file name of the configuration file to be downloaded from the backup server when
it has not been received from the DHCP server. Use the no form of this command
to remove the name.
Syntax
ip dhcp tftp-server file
file-path
no ip dhcp tftp-server file
Parameters
• file-path —Full file path and name of the configuration file on the server.
Default Configuration
No file name
Command Mode
Global Configuration mode
User Guidelines
The backup server can be a TFTP server or an SCP server.
Examples
switchxxxxxx(config)# ip dhcp tftp-server file conf/conf-file