System Management Commands
1185 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
62
62.2 hostname
To specify or modify the device host name, use the hostname Global
Configuration mode command. To remove the existing host name, use the no form
of the command.
Syntax
hostname
name
no hostname
Parameters
Name—Specifies the device host name. (Length: 1-58 characters). The hostname
must start with a letter, end with a letter or digit, and have as interior characters
only letters, digits, and hyphens.
Default Configuration
No host name is defined.
Command Mode
Global Configuration mode
Example
The following example specifies the device host name as ‘enterprise’.
switchxxxxxx(config)#
hostname enterprise
enterprise(config)#
62.3 reload
To reload the operating system at a user-specified time, use the reload Privileged
EXEC mode command.
Syntax
reload [in [hhh:mm | mmm] | at hh:mm [day month]] | cancel]
To Next Page
Loading...
