Cisco Sx350

Network Management Protocol (SNMP) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 866
43
Default Configuration
If viewname is not specified, all views are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the configured SNMP views.
43.9 show snmp groups
To display the configured SNMP groups, use the show snmp groups Privileged
EXEC mode command.
Syntax
show snmp groups [
groupname ]
Parameters
groupname—(Optional) Specifies the group name. (Length: 1–30 characters)
Default Configuration
Display all groups.
Command Mode
Privileged EXEC mode
switchxxxxxx# show snmp views
Name OID Tree Type
----------------
Default
Default
DefaultSuper
----------------------
iso
snmpNotificationMIB
iso
----------
Included
Excluded
Included