DHCP Server Commands
313 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
12
172.16.1.11 00a0.9802.32de
12.24 show ip dhcp excluded-addresses
To display the excluded addresses, use the show ip dhcp excluded-addresses
command in User EXEC mode.
Syntax
show ip dhcp excluded-addresses
Command Mode
User EXEC mode
Example
The following example displays excluded addresses.
switchxxxxxx#
show ip dhcp excluded-addresses
The number of excluded addresses ranges is 2
Excluded addresses:
10.1.1.212- 10.1.1.219, 10.1.2.212- 10.1.2.219
12.25 show ip dhcp expired
To display the specific expired address or all of the expired addresses on the
DHCP server, use the show ip dhcp expired command in User EXEC mode.
Syntax
show ip dhcp expired [
ip-address
]
Parameters
•
ip-address
—(Optional) Specifies the IP.
Command Mode
User EXEC mode
To Next Page
Loading...
