Radius Server Commands
987 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
49
49.14 radius server user
To create a user, use the radius server user command in Global Configuration
mode. To restore the default configuration, use the no form of this command.
Syntax
radius server user username
user-name
group
group-name
password
unencrypted-password
no radius server user [username
user-name
| group
group-name
]
Parameters
•
user-name
—Specifies the user name. (Length: 1–32 characters)
•
group-name
—Specifies the user group name. (Length: 1–32 characters)
•
unencrypted-password
—Specifies the user password. (Length: 1–64
characters)
Default Configuration
The user does not exist.
The Radius server supports up to 1000 users.
Command Mode
Global Configuration mode
User Guidelines
Use the radius server user command, to create a new user.
Use the no radius server user username
user-name
command to delete one user.
Use the no radius server user group
group-name
command to delete users of the
given group.
Use the no radius server user command to delete all users.
To Next Page
Loading...
