Cisco Sx350

Virtual Local Area Network (VLAN) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1276
67
User Guidelines
The VLAN classification rule priorities are:
• MAC-based VLAN (best match among the rules)
• Subnet-based VLAN (best match among the rules)
• Protocol-based VLAN
• PVID
Example
The following example forwards packets with protocols belong to protocol-group
1 to VLAN 8.
switchxxxxxx(config-if)# switchport general map protocols-group 1 vlan 8
67.22 show vlan protocols-groups
Use the show vlan protocols-groups EXEC mode command to display the
protocols that belong to the defined protocols-groups.
Syntax
show vlan protocols-groups
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode