Cisco Sx350 - Exit (Configuration)

User Interface Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1242
66
Parameters
This command has no arguments or keywords
Default Configuration
None
Command Mode
All configuration modes
Example
The following example ends the Global Configuration mode session and returns to
the Privileged EXEC mode.
switchxxxxxx(config)# end
switchxxxxxx#
66.8 exit (Configuration)
To exit any mode and bring the user to the next higher mode in the CLI mode
hierarchy, use the exit command.
Syntax
exit
Parameters
This command has no arguments or keywords
Default Configuration
None
Command Mode
All configuration modes