Cisco Sx350

Clock Commands
243 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
9
- Time: 2 AM local time
• Before 2007:
- Start: First Sunday in April
- End: Last Sunday in October
- Time: 2 AM local time
EU rules for Daylight Saving Time:
• Start: Last Sunday in March
• End: Last Sunday in October
• Time: 1.00 am (01:00) Greenwich Mean Time (GMT)
Example
switchxxxxxx(config)# clock summer-time abc date apr 1 2010 09:00 aug 2 2010
09:00
9.6 clock timezone
To set the time zone for display purposes, use the clock timezone command in
Global Configuration mode. To restore the default configuration, use the no form of
this command.
Syntax
clock timezone
zone hours-offset [ minutes-offset ]
no clock timezone
Parameters
• zone —The acronym of the time zone. (Range: Up to 4 characters)
• hours-offset —Hours difference from UTC. (Range: (-12)–(+13))
• minutes-offset —(Optional) Minutes difference from UTC. (Range: 0–59)