Cisco Sx350

IPv6 First Hop Security
713 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
29
switchxxxxxx# show ipv6 neighbor binding prefix table
Flags: A - the prefix can be used for autoconfig (stateless configuration)
Neighbor Prefix Table has 4 entries
VLAN Prefix Type Flags Remaining Lifetime
7 2004:1::/64 static A
7 2006:1::/64 dynamic 1230
7 2008:1::/64 static
1027 2002:1::/64 dynamic A 230
29.79 show ipv6 neighbor binding table
To display contents of the Binding table, use the show ipv6 neighbor binding table
command in Privilege EXEC configuration mode.
Syntax
show ipv6 neighbor binding table [vlan
vlan-id ] [interface interface-id ] [ipv6
ipv6-address ] [mac mac-address ]
Parameters
• vlan vlan-id —Displays the Binding table entries that match the specified
VLAN.
• interface interface-id —Displays the Binding table entries that match the
specified port (Ethernet port or port channel).
• ipv6 ipv6-address —Displays the Binding table entries that match the
specified IPv6 address.
• mac mac-address —Displays the Binding table entries that match the
specified MAC address.
Command Mode
Privileged EXEC mode