Cisco Sx350

7
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 205
Bonjour Commands
7.0
7.1 bonjour enable
To enable Bonjour globally, use the bonjour enable command in Global
Configuration mode. To disable Bonjour globally, use the no format of the
command.
Syntax
bonjour enable
no bonjour enable.
Default Configuration
Enable
Command Mode
Global Configuration mode
Examples
switchxxxxxx(config)# bonjour enable
7.2 bonjour interface range
To add L2 interfaces to the Bonjour L2 interface list, use the bonjour interface
range command in Global Configuration mode. To remove L2 interfaces from this
list, use the no format of the command.
Syntax
bonjour interface range
interface-list
no bonjour interface range [ interface-list ]