Cisco Sx350

Ethernet Configuration Commands
409 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
17
17.25 show link-flap prevention
To display whether link-flap prevention is enabled on the device, use the show
link-flap prevention Privileged EXEC mode command.
Syntax
show link-flap prevention
Parameters
This command has no arguments or keywords.
Default Configuration
None
Command Mode
Privileged EXEC mode
Example
The following example displays whether link-flap prevention is enabled on the
device.
switchxxxxxx# show link-flap prevention
link-flap prevention is currently enabled on device
17.26 show errdisable recovery
To display the Err-Disable configuration of the device, use the show errdisable
recovery Privileged EXEC mode command.
Syntax
show errdisable recovery
Parameters
This command has no arguments or keywords.