Cisco Sx350

System Management Commands
1205 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
62
Example 2: The following example displays the status of the port LEDs when they
are turned off.
switchxxxxxx> show port leds configuration
Port leds are disabled
62.22 show users
To display information about the active users, use the show users EXEC mode
command.
Syntax
show users
Parameters
This command has no arguments or keywords.
Default Usage
None
Command Mode
User EXEC mode
Example
The following example displays information about the active users.
switchxxxxxx> show users
Username
----------
Bob
John
Robert
Betty
Sam
Protocol
-----------
Serial
SSH
HTTP
Telnet
Location
------------
172.16.0.1
172.16.0.8
172.16.1.7
172.16.1.6