Cisco Sx350

RSA and Certificate Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1058
54
SHA1 Finger print: DC789788 DC88A988 127897BC BB789788
54.8 show crypto certificate
The show crypto certificate Privileged EXEC mode command displays the device
SSL certificates and key-pair for both default and user defined keys.
Syntax
show crypto certificate [mycertificate] [
number ]
Parameters
• number —Specifies the certificate number. (Range: 1,2)
• mycertificate—Specifies that only the certificate will be displayed
Default Configuration
Certificate number 1.
Command Mode
Privileged EXEC mode
Examples
The following example displays SSL certificate # 1 present on the device and the
key-pair.
switchxxxxxx# show crypto certificate 1
Certificate 1:
Certificate Source: Default
-----BEGIN CERTIFICATE-----
dHmUgUm9vdCBDZXJ0aWZpZXIwXDANBgkqhkiG9w0BAQEFAANLADBIAkEAp4HS
nnH/xQSGA2ffkRBwU2XIxb7n8VPsTm1xyJ1t11a1GaqchfMqqe0kmfhcoHSWr
yf1FpD0MWOTgDAwIDAQABo4IBojCCAZ4wEwYJKwYBBAGCNxQCBAYeBABDAEEw
CwR0PBAQDAgFGMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFAf4MT9BRD47
ZvKBAEL9Ggp+6MIIBNgYDVR0fBIIBLTCCASkwgdKggc+ggcyGgclsZGFwOi8v