Cisco Sx350 - 42 MLD Snooping Commands; Ipv6 Mld Snooping (Global); Ipv6 Mld Snooping Vlan

42
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 842
MLD Snooping Commands
42.0
42.1 ipv6 mld snooping (Global)
To enable IPv6 Multicast Listener Discovery (MLD) snooping, use the ipv6 mld
snooping command in Global Configuration mode. To return to the default, use the
no form of this command.
Syntax
ipv6 mld snooping
no ipv6 mld snooping
Parameters
N/A
Default Configuration
IPv6 MLD snooping is disabled.
Command Mode
Global Configuration mode
Example
The following example enables IPv6 MLD snooping.
switchxxxxxx(config)# ipv6 mld snooping
42.2 ipv6 mld snooping vlan
To enable MLD snooping on a specific VLAN, use the ipv6 mld snooping vlan
command in Global Configuration mode. To return to the default, use the no form of
this command.