Cisco Sx350

Virtual Local Area Network (VLAN) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1280
67
67.25 show vlan macs-groups
Use the show vlan macs-groups EXEC mode command to display the MAC
addresses that belong to the defined MAC-based classification rules.
Syntax
show vlan macs-groups
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays defined MAC-based classification rules.
switchxxxxxx# show vlan macs-groups
MAC Address Mask Group ID
--------------------- --------------------- ---------------------
00:12:34:56:78:90 20 22
00:60:70:4c:73:ff 40 1
67.26 map subnet subnets-group
Use the map subnet subnets-group VLAN Configuration mode command to map
an IP subnet to a group of IP subnets. Use the no form of this command to delete
the map.
Syntax
map subnet
ip-address prefix-mask subnets-group group
no map subnet ip-address prefix-mask