System Management Commands
1207 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
62
Hardware Version 1.0.0
62.25 system recovery
To set the system to automatically recover from temperature that reached the
critical threshold, use the system recovery Global Configuration command.
To return to disable automatic recovery, use the no form of the command.
Syntax
system recovery
no system recovery
Parameters
This command has no arguments or keywords.
Default Configuration
System recovery is enabled by default.
Command Mode
Global Configuration mode
Example
c
switchxxxxxx(config)#
no system recovery
To Next Page
Loading...
Need help?
General
