Cisco Sx350

DHCP Snooping Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 328
13
Command Mode
Privileged EXEC mode
Example
The following example clears the DHCP Snooping binding database.
switchxxxxxx# clear ip dhcp snooping database
13.9 show ip dhcp snooping
Use the show ip dhcp snooping EXEC mode command to display the DHCP
snooping configuration for all interfaces or for a specific interface.
Syntax
show ip dhcp snooping
[interface-id]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
User EXEC mode
Example
The following example displays the DHCP snooping configuration.
switchxxxxxx# show ip dhcp snooping
DHCP snooping is Enabled
DHCP snooping is configured on following VLANs: 21
DHCP snooping database is Enabled
Relay agent Information option 82 is Enabled
Option 82 on untrusted port is allowed
Verification of hwaddr field is Enabled