GARP VLAN Registration Protocol (GVRP) Commands
457 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
19
gi1
2 Enabled Normal Enabled 1200 400 20000
19.7 show gvrp error-statistics
Use the show gvrp error-statistics EXEC mode command to display GVRP error
statistics for all interfaces or for a specific interface.
Syntax
show gvrp error-statistics
[interface-id]
Parameters
interface-id—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or Port-channel.
Default Configuration
All GVRP error statistics are displayed.
Command Mode
User EXEC mode
Example
The following example displays GVRP error statistics.
switchxxxxxx#
show gvrp error-statistics
GVRP Error Statistics:
----------------------
Legend:
INVPROT : Invalid Protocol Id
INVATYP : Invalid Attribute Type INVALEN : Invalid Attribute Length
INVAVAL : Invalid Attribute Value INVEVENT: Invalid Event
Port INVPROT INVATYP INVAVAL INVALEN INVEVENT
-------- ------- ------- ------- ------- --------
gi1
1 0 0 0 0 0
gi1
2 0 0 0 0 0
To Next Page
Loading...
Need help?
General
