20
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 460
Green Ethernet
.1
20.1 green-ethernet energy-detect (global)
To enable Green-Ethernet Energy-Detect mode globally, use the green-ethernet
energy-detect Global Configuration mode command. To disable this feature, use
the no form of this command.
Syntax
green-ethernet energy-detect
no green-ethernet energy-detect
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)#
green-ethernet energy-detect
20.2 green-ethernet energy-detect
(interface)
Use the green-ethernet energy-detect Interface configuration mode command to
enable Green Ethernet-Energy-Detect mode on a port. Use the no form of this
command, to disable it on a port.
To Next Page
Loading...
Need help?
General
