Cisco Sx350

Ethernet Configuration Commands
411 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
17
Parameters
• interface—(Optional) Port or port-channel number.
Default Configuration
Display for all interfaces.
Command Mode
Privileged EXEC mode
Example
The following example displays the Err-Disable state of gi11
.
switchxxxxxx# show errdisable interfaces
Interface Reason
------------ ------------------
gi1
1 stp-bpdu-guard
17.28 clear switchport monitor
To clear monitored statistics on all or on a specific interface or interface list, use
the clear switchport monitor Privileged EXEC mode command.
Syntax
clear switchport monitor
[interface-id-list]
Parameters
interface-id-list—(Optional) Specifies a list of interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
Default Configuration
All monitored statistics are cleared.