Cisco Sx350

IPv6 First Hop Security
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 714
29
User Guidelines
This displays the contents of the Binding table. The display output can be
specified by the specified VLAN, port, IPv6 address, or MAC address. If no
keywords or arguments are entered, all Binding table contents are displayed.
Any keyword and argument combinations are allowed.
Example
The following example displays the contents of the Binding table:
switchxxxxxx# show ipv6 neighbor binding table
Binding Table has 4 entries
Field Descriptions:
• VLAN—VLAN the host belongs to.
• IPv6 address—IPv6 address of the host.
• Inter—port the host is connected on.
• MAC address—MAC address of the host.
• Origin—Protocol that has added the IPv6 address:
• Static—The static IPv6 address manually defined by the ipv6
neighbor binding static command.
• NDP—The IPv6 address learnt from the NDP protocol messages.
• DHCP—The IPv6 address learnt from the DHCPv6 protocol
messages.
• State—Entry’s state:
VLAN
-----
100
100
100
200
IPv6 address
-----------
2001:300::1
2001:600::1
2001:100::2
2001:200::3
Inter
-------
gi11
gi11
gi12
gi12
MAC address
--------------
AABB.CC01.F500
AABB.CC01.F501
AABB.CC01.F100
AABB.CC01.F160
Origin
------
NDP
NDP
NDP
NDP
State
-----
VALID
TENT
VALID
VALID
Expir
Time
------
559
96
79
TCAM
Ovrfl
-----
*