Cisco Sx350

IGMP Commands
477 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
21
Syntax
show ip igmp interface [
interface-id ]
Parameters
• interface-id —(Optional) Interface identifier.
Command Mode
User EXEC mode
User Guidelines
If you omit the optional
interface-id argument, the show ip igmp interface
command displays information about all interfaces.
Example
The following is sample output from the show ip igmp interface command for
Ethernet interface 2/1/1:
switchxxxxxx# show ip igmp interface vlan 100
VLAN 100 is up
Administrative IGMP Querier IP address is 1.1.1.1
Operational IGMP Querier IP address is 1.1.1.1
Current IGMP version is 3
Administrative IGMP robustness variable is 2 seconds
Operational IGMP robustness variable is 2 seconds
Administrative IGMP query interval is 125 seconds
Operational IGMP query interval is 125 seconds
Administrative IGMP max query response time is 10 seconds
Operational IGMP max query response time is 10 seconds
Administrative Last member query response interval is 1000 milliseconds
Operational Last member query response interval is 1000 milliseconds