Cisco Sx350

Ethernet Configuration Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 400
17
• detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
Display all interfaces. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the configuration of all configured interfaces:
switchxxxxxx# show interfaces configuration
Flow Admin Back Mdix
Port Type Duplex Speed Neg control State Pressure Mode
------ -------- ------ ----- -------- ------- ----- -------- ----
gi11 1G-Copper Full 1000 Disabled Off Up Disabled Off
Flow Admin
PO Type Speed Neg Control State
------ ------ ----- -------- ------- -----
Po1 Disabled Off Up
switchxxxxxx# show interfaces configuration
Port
----
te1
te1
te2
Type
-----------
10G-Fiber
10G-Fiber
10G-Fiber
------
Speed
-----
10000
10000
10000
Neg
-------
Off
Off
Off
Flow
Cont
----
On
Off
Off