Cisco Sx350

Smartport Commands
1073 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
55
Parameters
• interface-id —Interface Identifier (Ethernet interface, port channel)
• detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Information about all ports is displayed.
Command Mode
User EXEC mode
Examples
Example 1—Note that Smartport on switch and phone types was configured
automatically. Smartport on routers was configured statically. Auto smartports are
enabled globally.
switchxxxxxx# show macro auto ports
Smartport is enabled
Administrative Globally Auto Smartport is enabled
Operational Globally Auto Smartport is enabled
Example 2—Note that Smartport on switch and phone types was configured
automatically. Smartport on routers was configured statically. Auto smartports are
enabled globally.
Interface
-----------
gi11
gi12
gi13
gi14
Auto Smartport
Admin State
--------------
disabled
disabled
enabled
enabled
Persistent
State
----------
enabled
enabled
disabled
enabled
Smartport Type
--------------
router(stati
c)
switch
default
phone