Cisco Sx350

Clock Commands
259 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
9
Syntax
show sntp configuration
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Examples
The following example displays the device’s current SNTP configuration.
switchxxxxxx# show sntp configuration
SNTP port : 123
Polling interval: 1024 seconds
MD5 Authentication Keys
-----------------------------------
2 John123
3 Alice456
-----------------------------------
Authentication is not required for synchronization.
No trusted keys
Unicast Clients: enabled
Unicast Clients Polling: enabled
Server: 1.1.1.121
Polling: disabled
Encryption Key: disabled
Server: 3001:1:1::1
Polling: enabled