Cisco Sx350

File System Commands
421 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
18
- Active and Inactive Images
- Startup Configuration
- Secondary Language Dictionary
The following boot commands install/uninstall these files:
• boot config
• boot localization
• boot system
Additionally, the following commands from previous versions can be used too:
• copy (copy running-config startup-config)
• write
Note. Reset to Factory Default removes all files from the FLASH except the
following files:
• active-image
• inactive-image
• mirror-config
• localization
The flash://system/ directory contains the following directories:
• flash://system/images/—The directory contains the Active and Inactive
Image files.
• flash://system/configuration/—The directory contains the Startup and
Mirror Configuration files.
• flash://system/localization/—The directory contains the Secondary
Language Dictionary file.
• flash://system/syslog/—The directory contains the Syslog file.
• flash://system/applications/—The directory contains inner system files
managed by the switch applications.