Cisco Sx350

IPv4 IPM Router Commands
549 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
27
IP Unicast Forwarding: enabled
IP Multicast Protocol: No
Example 2. The following is sample output from the show ip multicast command
without the interface keyword when IGMP Proxy is enabled:
switchxxxxxx# show ip multicast
IP Unicast Forwarding: enabled
IP Multicast Protocol: IGMP Proxy
Example 3. The following is sample output from the show ip multicast command
about the given interface. IGMP Proxy is enabled on the interface and the interface
is an IGMP Proxy Upstream interface:
switchxxxxxx# show ip multicast interface vlan 200
IP Unicast Forwarding: enabled
IP Multicast Protocol: IGMP Proxy
vlan 200
TTL-threshold: 0
IGMP Protocol: IGMPv3
IGMP Proxy: Upstream
Example 4. The following is sample output from the show ip multicast command
about the given interface. IGMP Proxy is enabled on the interface and the interface
is an IGMP Proxy Downlink interface:
switchxxxxxx# show ip multicast interface vlan 100
IP Unicast Forwarding: enabled
IP Multicast Protocol: IGP Proxy
vlan 200
TTL-threshold: 0