IPv6 First Hop Security
719 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
29
User Guidelines
If this command is part of a policy attached to a VLAN, it is applied to all the ports
in the VLAN. If it is defined in a policy attached to a port in the VLAN, this value
overrides the value in the policy attached to the VLAN.
Example
The following example enables the router to drop an NDP message whose
link-layer address does not match the MAC address:
switchxxxxxx(config)#
ipv6 nd inspection policy
policy1
switchxxxxxx(config-nd-inspection)#
validate source-mac
switchxxxxxx(config-nd-inspection)# exit
To Next Page
Loading...
