Cisco Sx350

IPv6 Prefix List Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 734
31
count: 3, range entries: 2
seq 5 deny 3FFE:C00::/24 ge 25 (hit count: 568)
seq 10 description The Default Action
seq 15 permit ::/0 le 48 (hit count: 31310)
Field Descriptions
• count—Number of entries in the list.
• range entries—Number of entries with matching range.
• seq—Entry number in the list.
• permit, deny—Granting status.
• description—Comment.
• hit count—Number of matches for the prefix entry.
Example 2. The following example shows the output of the show ipv6 prefix-list command with the
summary keyword:
switchxxxxxx# show ipv6 prefix-list summary
ipv6 prefix-list aggregate:
count: 2, range entries: 2
Example 3. The following example shows the output of the show ipv6 prefix-list command with the seq
keyword:
switchxxxxxx# show ipv6 prefix-list bgp-in seq 15
seq 15 deny ::/1 (hit count: 0)