Cisco Sx350

MLD Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 834
40
Syntax
show ipv6 mld interface [
interface-id ]
Parameters
• interface-id —Interface identifier.
Command Mode
User EXEC mode
User Guidelines
If you omit the optional
interface-id argument, the show ipv6 mld interface
command displays information about all interfaces.
Example
The following is sample output from the show ipv6 mld interface command for
Ethernet interface 2/1/1:
switchxxxxxx# show ipv6 mld interface vlan 100
VLAN 100 is up
Administrative MLD Querier IPv6 address is FE80::260:3EFF:FE86:5649
Operational MLD Querier IPv6 address is FE80::260:3EFF:FE86:5649
Current MLD version is 3
Administrative MLD robustness variable is 2 seconds
Operational MLD robustness variable is 2 seconds
Administrative MLD query interval is 125 seconds
Operational MLD query interval is 125 seconds
Administrative MLD max query response time is 10 seconds
Operational MLD max query response time is 10 seconds
Administrative Last member query response interval is 1000 milliseconds
Operational Last member query response interval is 1000 milliseconds