Dell PowerConnect 8024 - Page 100

100 Command Groups
Configuration and Image Files
clock summer-time recurring Sets the summertime offset to UTC recursively every year. GC
clock summer-time date Sets the summertime offset to UTC. GC
no clock summer-time Resets the recurring summertime configuration. GC
show clock Displays the time and date from the system clock. PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
boot system Specifies the system image that the switch loads at startup. PE
clear config Restores switch to default configuration PE
copy Copies files from a source to a destination. PE
delete backup-image Deletes a file from a flash memory. PE
delete backup-config Deletes the backup configuration file PE
delete startup-config Deletes the startup configuration file. PE
filedescr Adds a description to a file. PE
script apply Applies commands in the script to the switch. PE
script delete Deletes a specific script. PE
script list Lists all scripts present in the switch. PE
script show Displays the contents of a script file. PE
script validate Validates a script file. PE
show backup-config Displays contents of a backup configuration file PE
show bootvar Displays the active system image file that the switch loads
at startup.
UE
show dir Lists all the files available on the flash file system. PE
show running-config Displays the contents of the currently running
configuration file.
PE
show startup-config Displays the startup configuration file contents. PE
update bootcode Updates the bootcode on one or more switches. PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*