Dell PowerConnect 8024 - Page 99

Command Groups 99
Clock
show captive-portal configuration
interface
Displays information about all interfaces assigned to a
captive portal configuration or about a specific interface
assigned to a captive portal configuration.
PE
show captive-portal configuration
locales
Displays locales associated with a specific captive portal
configuration.
PE
show captive-portal configuration
status
Displays information about all configured captive portal
configurations or a specific captive portal configuration.
PE
show captive-portal trapflags Displays which captive portal traps are enabled. PE
user group Creates a user group. CP
user group moveusers Moves a group's users to a different group. CP
user group name Configures a group name. CP
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
clock set Sets the current date and time. GC
show clock Displays the time and date of the system clock. PE
show sntp configuration Displays the SNTP configuration. PE
show sntp status Displays the SNTP status. PE
sntp authenticate Set to require authentication for received NTP traffic from
servers.
GC
sntp authentication-key Defines an authentication key for SNTP. GC
sntp broadcast client enable Enables SNTP Broadcast clients. GC
sntp client enable Enables SNTP Broadcast and Anycast clients on an
interface.
IC
sntp client poll timer Defines polling time for the SNTP client. GC
sntp server Configures the SNTP server to use SNTP to request and
accept NTP traffic from it.
GC
sntp trusted-key Authenticates the identity of a system to which Simple
Network Time Protocol (SNTP) will synchronize.
GC
sntp unicast client enable Enables clients to use Simple Network Time Protocol
(SNTP) predefined Unicast clients.
GC
clock timezone hours-offset Sets the offset to Coordinated Universal Time. GC
no clock timezone Resets the time zone settings. GC
Command Description Mode*