Dell PowerConnect 8024 - Page 122

122 Using the CLI
RADIUS From Global
Configuration mode,
use the radius-server
host command.
console(config-
radius)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
SNMP Host
Configuration
From Global
Configuration mode,
use the snmp-server
command.
console(config-
snmp)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
SNMP v3 Host
Configuration
From Global
Configuration mode,
use the snmp-server v3-
host command.
console(config-
snmp)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
SNMP Community
Configuration
From Global
Configuration mode,
use the snmp-server
community command.
console(config-
snmp)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode
Crypto Certificate
Generation
From Global
Configuration mode,
use the crypto
certificate
number
generate command.
console(config-
crypto-cert)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
Crypto Certificate
Request
From Privileged EXEC
mode, use the crypto
certificate
number
request command.
console(config-
crypto-cert)#
To exit to Privileged
EXEC mode, use
the exit command,
or press
<Ctrl>+<Z>.
Command Mode Access Method Command Prompt Exit or Access
Previous Mode