Dell PowerConnect 8024 - Page 123

Using the CLI 123
Stack From Global
Configuration mode,
use the stack command.
console(config-
stack)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
Logging From Global
Configuration mode,
use the logging
command.
console(config-
logging)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
MST From Global
Configuration mode,
use the spanning-tree
mst configuration
command.
console(config-
mst)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
VLAN Config From Global
Configuration mode,
use the vlan database
command.
console(config-
vlan)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
Router OSPF Conf From Global
Configuration mode,
use the router ospf
command.
console(config-
router)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode
Router RIP Config From Global
Configuration mode,
use the router rip
command.
console(config-
router)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode
Command Mode Access Method Command Prompt Exit or Access
Previous Mode