Dell PowerConnect 8024 - Page 124

124 Using the CLI
Router OSPFv3 Config From Global
Configuration mode,
use the ipv6 router ospf
command.
console(config-
rtr)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode
IPv6 DHCP Pool Mode From Global
Configuration mode,
use the ipv6 dhcp pool
command.
console(config-
dhcp6s-pool)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode
DataCenterBridging From Interface
Configuration mode,
use the datacenter-
bridging command.
console (config-if-
dcb)#
To exit to Interface
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
Interface Configuration Modes
Ethernet From Global
Configuration mode,
use the interface
ethernet command.
console (config-if-
n/gn or n/xgn)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
Out-of-Band From Global
Configuration mode,
use the interface out-of-
band command.
console (config-
if)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
Command Mode Access Method Command Prompt Exit or Access
Previous Mode