50 Command Groups
Line Configures the console, SSH, and remote Telnet connection.
Management ACL Configures and displays management access-list information.
Password Management Provides password management.
PHY Diagnostics Diagnoses and displays the interface status.
RMON Can be configured through the CLI and displays RMON information.
Serviceability Tracing Controls display of debug output to serial port or telnet console.
sFlow Configures sFlow monitoring.
SNMP Configures SNMP communities, traps and displays SNMP information.
SSH Configures SSH authentication.
Syslog Manages and displays syslog messages.
System Management Configures the switch clock, name and authorized users.
Telnet Server Configures Telnet service on the switch and displays Telnet information.
User Interface Describes user commands used for entering CLI commands.
Web Server Configures Web based access to the switch.
Table 1-1. System Command Groups
(continued)
Command Group Description
To Next Page
Loading...
