Command Groups 55
Auto-VoIP
CDP Interoperability
Command Description Mode*
show switchport voice Displays the status of auto-voip on an interface or all
interfaces.
PE
switchport voice detect auto Enables the VoIP Profile on all the interfaces of the switch. GC/IC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
clear isdp counters Clears the ISDP counters. PE
clear isdp table Clears entries in the ISDP table. PE
isdp advertise-v2 Enables the sending of ISDP version 2 packets from the
device.
GC
isdp enable Enables ISDP on the switch. GC/IC
isdp holdtime Configures the hold time for ISDP packets that the switch
transmits.
GC
isdp timer Sets period of time between sending new ISDP packets. GC
show isdp Displays global ISDP settings. PE
show isdp interface Displays ISDP settings for the specified interface. PE
show isdp entry Displays ISDP entries. PE
show isdp neighbors Displays the list of neighboring devices. PE
show isdp traffic Displays ISDP statistics. PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
To Next Page
Loading...
